Nex Flow™
Air Products Corp.
- India is a manufacturer
of compressed air-operated products made to improve
plant efficiency, improve energy efficiency, improve
quality and enhance the environment. Our product
line includes air blow-off products that reduce
noise levels and compressed air use, and vortex
tube technology using vortex
tubes for spot cooling, control panel
cooling, tool cooling and other unique applications.
It also includes air operated conveying products
and static control technology.
Read more....
Air
Amplifiers are actually energy “converters”
that convert the pressure from compressed air
into useful and amplified air flow creating a
simple, inexpensive means to move air, fumes,
and light materials. Hence the original
term “air movers”. Air
Amplifiers use the “coanda effect”
to entrain the surrounding air and create a high
output flow. Because the energy normally
lost as noise and pressure drop is converted to
flow, the noise levels drop dramatically and the
output flow is increased up to 25 times the air
consumed.
Adjustable Air
Amplifiers : anodized aluminum or stainless
steel for high temperature or food
applications. The customer can set
the gap and lock it in place using a lock
ring.
Fixed Air
Amplifiers : zinc die cast Standard Air Amplfiers
from Nex Flow™ are solid and perform as
well or better than patented designs when used
in similar applications. The gap can be
adjusted by adding shims, five sizes are available.
Nex
Flow™ air
knife “Air
Blades™” dramatically reduce
compressed air and noise levels as compared
to other blow-off products. They provide
a compact and efficient means to dry, clean
and cool materials. Air
knives operate by entraining the surrounding
air along with the compressed air utilizing
the “coanda” effect essentially
converting energy which would normally be lost
as noise and pressure drop into useful flow.
No matter what anyone tells you, all air
knives using the coanda effect are essentially
the same in performance with negligible differences.
However, how they are made is what is very important
to make sure you get value for your money.
Air
Consumption approx. 3.4 SCFM (82 SLPM)
per inch (25.4 mm) at 80 psig (5.5 bar)
with force and noise levels comparable
to standard air knives of all types.
The X-Steam™
Air Bladeair knife is normally
the best choice due to very low noise levels
and it uses less air than a standard air
blade air knife at the same pressure.
However the standard unit is lower in cost and
has a slightly higher force at the same pressure.
Either version may be mounted end to end for
longer lengths of continuous flow.
The new
X-stream™ Curved Air
Bladeair knife
is easy to mount and maintain and reduces both
compressed air consumption and noise levels.
It’s curved design produces an expanding,
powerful blast of air in a fan shape to blow
off wide areas and can minimize air use using
longer air knives.
Nex Flow™
removes the confusion from air jets
and air nozzles.
You do NOT need hundreds of different nozzles.
All air amplifying nozzles produce air flows
up to 25 times the compressed air consumed.
Different air nozzles
have different outlet sizes and the more air
used, the greater the force produced.
Noise reduction up t0 10 dBA is typicall as
well as reduced air consumption when compared
to open jets and tubes.
Air
jets entrain large volumes of surrounding
air through the jet (similar to air amplifiers)
and are more efficient than air nozzles.
They cover a larger blow-off target than a nozzle.
Nex
Flow™ stainless steel Vortex
Tube uses a metal (brass) generator as a
standard item rather than cheap plastic for
longer life and for applications in high temperature
environments. (competitors would charge extra
for that feature.) With virtually no moving
parts, a vortex tube
takes compressed air and converts it to cold
air at one end and hot air at the other. Temperature
as low as minus 50 degrees F (minus 460 C) can
be achieved at the cold end and up to 260 degrees
F (127 degrees C) at the hot end Vortex
Tube are available in two basic sizes and
in several packaged versions:
complete with a swivel base
with magnetic attachment. Applications are where
adjustability is required. All Nex
Flow™ adjustable spot coolers
are stainless steel for long life.
cool and purge clean
electrical and electronic control panels
with no refrigerant, and virtually no
maintenance. Eliminate over heating
, humidity and dirt.
Frigid-X™
Tool Cooling System for dry machining applications
- replaces polluting and often toxic mist systems
to improve dry machining operations. No mess,
no residue and low in cost.
Air
Conveyors - Ring-Vac™ Pneumatic Conveying
System has virtually no moving parts, convey's
air at high rates and long distances. Utilizing
compressed air for a powerful, efficient
venturi action along its length in a compact
design for high capacity conveying over
large distances.
Nex
Flow™ offers specialty items
to improve industry housekeeping and specialty
applications utilizing air amplification and
vacuum technology. The following items
utilize compressed air, eliminating the problems
of high maintenance and short life span
from electrical vacuum and blower systems often
used in these application.
Reversible
Drum Angel (2-way reversible drum pump)
is a system to fill or empty a drum in
under 90 seconds. It is perfect for
coolant sumps, general cleanup, and spill
recovery.
X-Stream
hand™ vac is
a blow-off gun, and vacuum gun, and a transfer
system in one package. It is used for vacuuming,
the transfer of small parts, and cleanup up
of chips, sawdust, coolant, etc. This low
cost unit is an ideal package for maintenance.
Spray Booth
Dry Air Gun: is a hand held air amplification
system c/w screen to prevent dirt from being
blown onto the spray booth wall to speed the
cooling and drying of paint.
Nex
Flow™ Efficient Use of Compressed Air
– It has to be understood that compressed
air is a high cost energy source. So there has
to be a reason to use compressed air alternative
products. ANY amplification technology, when
used properly can get you excellent efficiencies.
Because our compressed air products are generally
light weight, can be turned on and off rapidly
(so only used when necessary), and are low or
no maintenance, their efficient use overall
contributes well to the overall productivity
of a production facility.
This device can be
used to locate costly leaks in your compressed
air system. Eliminating compressed air
leaks can recover a tremendous amount
of energy that can be used to operate
all types of nozzles, amplifiers and vortex
tubes with no added cost! Air savings
means free energy.
All Nex Flow™ products
are designed to improve plant efficiency by
either reducing the compressed air used while
in use, or in a way to reduce maintenance, or
in another to improve productivity.
Nex Flow™
is your worldwide source for quality products related
to specialized air flow applications, in particular
air moving, air amplification, air conveying and air
cooling.
Our aim is to provide
the highest quality product at the lowest, competitive
price with technical support as required and to address
manufacturing operations in order to improve productivity
and safety.
If there is
a distributor in the area you will be referred to them
to contact you with pricing.
